Hisense is one of the popular and cheap TV brands. However, it is vulnerable to certain kinds of issues. For example, many users report that the red light on their Hisense TV blinks 10 times.
In this case, the TV stops working. Either the sound or the picture disappears. Sometimes, the TV goes OFF completely. The standby light may remain ON or turns OFF.
Moreover, it continues blinking and the TV screen gives no response. This guide specifically aims at fixing your Hisense TV that blinks 10 times. This guide works for all models of Hisense TV.
How I Fixed a Blinking Hisense TV
In addition to my followers, one of my friends also reported this issue. So, I devised some tricks and found some solutions online. Then, I compiled a bunch of troubleshooting tricks.
Before presenting them to you, I have personally tested all these hacks by applying them on my friend’s TV. Fortunately, a series of troubleshooting steps fixed my friend’s Hisense TV.
I diagnosed that the capacitors on the power board were faulty. We replaced them and his TV is now working fine. I am explaining these helpful hacks in this guide.
Surely, by the end of this article, your problem will be solved. So, stay with me and follow every step as described.
1. Power Cycle Your TV
The first and foremost thing you should try is to power cycle your Hisense TV. Here is how to do it;
- Unplug your TV from the wall power outlet and disconnect the power completely.
- Wait for 1-2 minutes.
- Now, connect the TV to the wall power outlet again.
- Press the power button on the TV set or on the remote to turn it ON.
- Repeat the process 2-3 times if it does not help on the first attempt.
2. Soft Reset Your Hisense TV
If the power cycle does not make any difference, try a soft reset. It helps in removing bugs and malware from your device. The steps are as follows;
- Unplug your Hisense TV from the power supply.
- Now, press and hold the “Power” button on the TV set. Release it after 15 seconds.
- Wait a few seconds and hold the power button again. Repeat these steps 2-3 times.
- After 5 minutes, plug your TV back into the power outlet. Now, try to turn ON your TV.
3. Ensure Proper Ventilation
Sometimes, the issue is very minor and not related to hardware. Your TV may be poorly ventilated. The unit heats up when used continuously.
Hence, it is necessary to provide it with ventilation. Your TV may not be receiving enough airflow. That’s why the fans cannot cool it down. Open your TV and clean the fans and other parts.
Because dust accumulates over time and blocks airflow. This easy trick can solve the problem.
4. Check the LED Lights
Smart TVs are equipped with LED lights. They are present behind the display screen. If these lights are faulty, your TV will not display anything.
In most cases, the LED lights have gone bad if the red light is blinking 10 times. So, you need to open the TV and check whether the LED lights are working or not.
Replace the defective lights. If they are fine, replace the LED driver. You can replace them at home if you have any practical knowledge about electronics. Otherwise, call a technician to avoid further issues.
5. Test the Power Board
The built-in power supply board of your TV may have gone defective. It receives power when you connect the TV to the wall outlet.
The power is then transferred to the main board. T-Con board and controller board are other parts that need power.
So, the power board is responsible to receive and distribute the power to other components. A capacitor or diode is dead on the power board.
It receives supply but cannot transfer to other parts. Its failure results in the TV not working issue. Therefore, you need to test this part.
Use a multimeter to test the voltage supply to the board. Do it yourself or call a technician. Replacing the bad component on the power board can solve the issue.
But, make sure you have diagnosed the problem correctly and that no other component is faulty.
Precaution: Leave your TV for a few minutes before accessing its hardware. Because it stores current and can give you an electric shock. Do not open the TV if you have no knowledge of electronics.
FAQs About Hisense TV Blinking Red
Here are further queries that you want to ask. I intend to help you further fix your Hisense TV that is flashing red.
Why is my Hisense TV blinking red?
Red light blinking on your Hisense TV indicates an underlying hardware issue. Mostly, it is a faulty power board. However, the problem can be caused by other hardware components. So, diagnose and replace the defective part.
How to fix if my Hisense TV is turning ON/OFF?
The reasons behind Hisense TV turning ON/OFF can be many. For example, a system error, software bugs, or hardware defects are the causes. Moreover, poor internet connection or bad power supply can also lead to such a problem. Just restart your TV to solve the issue.
How many years of warranty does Hisense TV have?
Hisense TVs come with a 1-year warranty period. This warranty is valid for parts and labor. While the replacement warranty is 90 days. However, if the unit is damaged on the user’s part, the company will not accept a claim.
Also read: Learn to Fix Hisense TV has no Picture but Bluet Light is ON
Final Words
If nothing helps, you should contact Hisense to ask for repair or replacement. I have personally tested all the tricks mentioned in this guide.
They are effective and applicable to all Hisense models. I fixed my friend’s TV by replacing the capacitors on the power board.
Your Hisense TV may have the same issue. But, you need to diagnose it correctly. Call a local mechanic if you cannot do it yourself.
Because in most cases, Hisense TV has a bad hardware part if its red light blinks 10 times. It is important to rightly detect which part is bad.
